manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 624

Maintenance

70

8

Fuses

Fuses

Blade type / Cartridge type / Multi fuse 

/ Fusible link

* Left side : Normal

Right side : Blown

A vehicle䳓s electrical system is pro

-

tected from electrical overload 
damage by fuses.

This vehicle has 4 (or 5) fuse panels, 
one located in the driver䳓s side panel 

bolster, the others in the engine 
compartment near the battery.

If any of your vehicle䳓s lights, acces

-

sories, or controls do not work, 
check the appropriate circuit fuse. If 
a fuse has blown, the element inside 
the fuse will melt.

If the electrical system does not 
work, first check the driver䳓s side 
fuse panel.

Before replacing a blown fuse, dis

-

connect the negative battery cable.

Always replace a blown fuse with 
one of the same rating.

If the replacement fuse blows, this 
indicates an electrical problem. 
Avoid using the system involved and 
immediately consult a professional 
workshop. Kia recommends to con

-

sult an authorised Kia dealer/service 
partner.

Three kinds of fuses are used: blade 
type for lower amperage rating, 
cartridge type, and multi fuse for 
higher amperage ratings.

WARNING

Fuse replacement

䳜 Never replace a fuse with any

-

thing but another fuse of the 
same rating.

䳜 A higher capacity fuse could cause 

damage and possibly a fire.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands