manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 411

89

6

6

Driving your vehicle

Forward Collision-Avoidance Assist (FCA)

(Sensor fusion)

WARNING

䳜 For your safety, change the 

settings after parking the vehicle 
at a safe location.

䳜 With 䳒Active assist䳓 or 䳒Warning 

only䳓 selected, when ESC is turned 
off by pressing and holding the 
ESC OFF button, Forward Colli

-

sion-Avoidance Assist will turn off 
automatically. In this case, the 
function cannot be set from the 
settings menu and the warning 
light will illuminate on the cluster 
which is normal. If ESC is turned 
on by pressing the ESC OFF but

-

ton, Forward Collision-Avoidance 
Assist will maintain the last set

-

ting.

䳜 Forward Collision-Avoidance 

Assist does not operate in all situ

-

ations or cannot avoid all colli

-

sions.

䳜 The driver should hold the 

responsibility to control the vehi

-

cle. Do not solely depend on For

-

ward Collision-Avoidance Assist. 
Rather, maintain a safe braking 
distance, and if necessary, 
depress the brake pedal to reduce 
driving speed or to stop the vehi

-

cle.

䳜 Never deliberately operate For

-

ward Collision-Avoidance Assist 
on people, animal, objects, etc. It 
may cause serious injury or death.

䳜 Forward Collision-Avoidance 

Assist may not operate if the 
driver depresses the brake pedal 
to avoid collision.

䳜 Depending on the road and driving 

conditions, Forward Collision-
Avoidance Assist may warn the 
driver late or may not warn the 
driver.

䳜 During Forward Collision-Avoid

-

ance Assist operation, the vehicle 
may stop suddenly injuring pas

-

sengers and shifting loose 
objects. Always have the seat belt 
on and keep loose objects 
secured.

䳜 If any other function䳓s warning 

message is displayed or audible 
warning is generated, Forward 
Collision-Avoidance Assist warn

-

ing message may not be dis

-

played and audible warning may 
not be generated.

䳜 You may not hear the warning 

sound of Forward Collision-Avoid

-

ance Assist if the surrounding is 
noisy.

䳜 Forward Collision-Avoidance 

Assist may turn off or may not 
operate properly or may operate 
unnecessarily depending on the 
road conditions and the surround

-

ings.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands