manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 598

Maintenance

44

8

Engine Coolant

working near the blades of the cool

-

ing fan so that you are not injured 
by a rotating fan blades. As the 
engine coolant temperature 
decreases, the electric motor will 
automatically shut off. This is a nor

-

mal condition.
The electric motor (cooling fan) may 
operate until you disconnect the 
negative battery cable.

(Petrol) 1.6 MPI/

(Petrol) 2.0 MPI/Smartstream G1.6 

Petrol) 1.6 T-GDi 

Check the condition and connections 
of all cooling system hoses and 

heater hoses. Replace any swollen 
or deteriorated hoses.

The coolant level should be filled 
between F and L (or MAX and MIN) 
marks on the coolant level gauge 
when the engine is cool.

If the coolant level is low, add 
enough specified coolant to provide 
protection against freezing and cor

-

rosion. Bring the level to F (or MAX), 
but do not overfill. If frequent addi

-

tions are required, have the system 
inspected by a professional work

-

shop. Kia recommends to visit an 
authorised Kia dealer/service part

-

ner.

NOTICE

Make sure the coolant cap is prop

-

erly closed after refill of coolant.
Otherwise the engine could be over

-

heated whilst driving.

1. Check if the radiator cap label is 

straight In front.

Engine room front view

OBD071005

OBD078133L

OJA070150L

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands