manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 113

17

4

4

Features of your vehicle

Keys

To activate the immobiliser sys

-

tem:

Turn the ignition key to the OFF 
position. The immobiliser system 
activates automatically. Without a 
valid ignition key for your vehicle, 
the engine will not start.

Vehicles with smart key system

Whenever the ENGINE START/STOP 
buttons are changed to the ON posi

-

tion, the immobiliser system checks 
and verifies if the key is valid or not.

If the key is valid, the engine will 
start.

If the key is invalid, the engine will 
not start.

To deactivate the immobiliser sys

-

tem

Change the ENGINE START/STOP 
button to the ON position.

To activate the immobiliser system

Change the ENGINE START/STOP 
button to the OFF position. The 
immobiliser system activates auto

-

matically. Without a valid smart key 
for your vehicle, the engine will not 
start.

WARNING

In order to prevent theft of your 
vehicle, do not leave spare keys 
anywhere in your vehicle. Your 
immobiliser password is a customer 
unique password and should be kept 
confidential. Do not leave this num

-

ber anywhere in your vehicle.

NOTICE

When starting the engine, do not 
use the key with other immobiliser 
keys around. Otherwise the engine 
may not start or may stop soon 
after it starts. Keep each key sepa

-

rately in order to avoid a starting 
malfunction.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands