manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 129

33

4

4

Features of your vehicle

Trunk(For 4door)

WARNING

Rear cargo area

Occupants should never ride in the 
rear cargo area where no  restraints 
are available. To avoid injury in the 
event of an accident or sudden 
stops, occupants should always be 
properly restrained.

Emergency trunk safety release

Your vehicle is equipped with an 
emergency trunk release lever 
located inside the trunk. If someone 
is inadvertently locked in the trunk, 
moving the handle in the direction of 
the arrow will release the trunk latch 
mechanism and open the trunk.

WARNING

䳜 You and your passengers must be 

aware of the location of the 
Emergency Trunk Safety Release 
lever in this vehicle and how to 
open the trunk in case you are 
accidentally locked in the trunk.

䳜 NEVER allow anyone to occupy 

the trunk of the vehicle at any 
time. If the trunk is partially or 
totally latched and the person is 
unable to get out, serious injury 
or death could occur due to lack of 
ventilation, exhaust fumes and 
rapid heat build-up, or because of 
exposure to cold weather condi

-

tions. The trunk is also a highly 
dangerous location in the event of 
a crash because it is not a pro

-

tected occupant space but is a 
part of the vehicle䳓s crush zone.

䳜 Your vehicle should be kept locked 

and the Smart Key should be kept 
out of the reach of children. Par

-

ents should teach their children 
about the dangers of playing in 
trunks.

䳜 Use the release lever for emer

-

gencies only.

OBD041041

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands