manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 531

7

7

7

What to do in an emergency

Emergency starting

not to get acid on yourself, your 
clothing or on the vehicle.

䳜 Do not attempt to jump start the 

vehicle if the discharged battery is 
frozen or if the electrolyte level is 
low; the battery may rupture or 
explode.

䳜 Do not allow the (+) and (-) 

jumper cables to touch. It may 
cause sparks.

䳜 The battery may rupture or 

explode when you jump start with 
a low or frozen battery.

Jump starting procedure

1. Make sure the booster battery is 

12-volt and that its negative ter

-

minal is grounded.

2. If the booster battery is in 

another vehicle, do not allow the 
vehicles come in contact.

3. Turn off all unnecessary electrical 

loads.

4. Connect the jumper cables in the 

exact sequence shown in the illus

-

tration. First connect one end of a 
jumper cable to the positive ter

-

minal of the discharged battery 
(1), then connect the other end to 
the positive terminal on the 
booster attery (2).
Proceed to connect one end of the 
other jumper cable to the nega

-

tive terminal of the booster bat

-

tery (3), then the other end to a 
solid, stationary, metallic point 
(for example, the engine lifting 

bracket) away from the battery 
(4). Do not connect it to or near 
any part that moves when the 
engine is cranked.
Do not allow the jumper cables to 
contact anything except the cor

-

rect battery terminals or the cor

-

rect ground. Do not lean over the 
battery when making connec

-

tions.

CAUTION

Battery cables

Do not connect the jumper cable 
from the negative terminal of the 
booster battery to the negative ter

-

minal of the discharged battery. 
This can cause the discharged bat

-

tery to overheat and crack, releas

-

ing battery acid. Make sure to 
connect one end of the jumper cable 
to the negative terminal of the 
booster battery, and the other end 
to a metallic point, far away from 
the battery.

5. Start the engine of the vehicle 

with the booster battery and let it 
run at 2,000 rpm, then start the 
engine of the vehicle with the dis

-

charged battery.

If the cause of your battery dis

-

charging is not apparent, have the 
system checked by a professional 
workshop. Kia recommends to visit 
an authorised Kia dealer/service 
partner.

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands