manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 659

105

8

8

Maintenance

Light bulbs

High mounted stop lamp (bulb 
type) bulb replacement 

1. Open the trunk/tailgate lid.
2. Remove the socket from the 

assembly by turning the socket 
counterclockwise until the tabs on 
the socket align with the slots on 
the assembly.

3. Remove the bulb from the socket 

by pressing it in and rotating it 
counterclockwise until the tabs on 
the bulb align with the slots in the 
socket. Pull the bulb out of the 
socket. 

4. Insert a new bulb by inserting it 

into the socket and rotating it 
until it locks into place.

5. Install the socket in the assembly 

by aligning the tabs on the socket 
with the slots in the assem

-

bly.Push the socket into the 
assembly and turn the socket 
clockwise. 

High mounted stop lamp bulb 
replacement

4 door

5 door

If the high mounted stop lamp (1) 
does not operate, have your vehicle 
checked by a professional workshop. 
Kia recommends to visit an 
authorised Kia dealer/service part

-

ner.

OBD071204

OBD071054

OBD071132

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands