manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 596

Maintenance

42

8

Engine oil (Petrol)

authorised Kia dealer/service part

-

ner.
䳜 If the maintenance schedule to 

replace engine oil is exceeded, the 
engine oil performance may dete

-

riorate, and the engine condition 
may be affected. Therefore, 
replace the engine oil according to 
the maintenance schedule.

䳜 To keep the engine in optimal 

condition, use the recommended 
engine oil and filter. If the recom

-

mended engine oil and filter are 
not used replace it according to 
the maintenance schedule under 
severe usage conditions.

䳜 The purpose of the maintenance 

schedule for engine oil replace

-

ment is to prevent oil deteriora

-

tion and it is irrelevant to oil 
consumption. Check and refill 
engine oil regularly. 

WARNING

Used engine oil 

Used engine oil may cause skin irri

-

tation or cancer if left in contact 
with the skin for prolonged periods 
of time. Used engine oil contains 
chemicals that have caused cancer 
in laboratory animals. Always pro

-

tect your skin by washing your 
hands thoroughly with soap and 
warm water as soon as possible 
after handling used oil.

CAUTION

The engine oil is very hot immedi

-

ately after the vehicle has been 
driven and can cause burns during 
replacement. Replace the engine oil 
after the engine oil has cooled down. 

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands