manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 125

29

4

4

Features of your vehicle

Safe Exit Warning (SEW)

- Blind-Spot Safety system sen

-

sor or the sensor surrounding is 
polluted or covered

- Blind-Spot Safety system fails 

to warn passengers or prema

-

turely warn passengers

NOTICE

After the engine is turned off, Safe 
Exit Warning operates approxi

-

mately for 3 minutes, but turns off 
immediately if the doors are locked.

Function malfunction and limita

-

tions

Function malfunction

When Blind-Spot Safety system is 
not working properly, the 䳒Check 
blind-spot safety system䳓 warning 
message will appear on the cluster, 
and the function will turn off auto

-

matically or the function will be lim

-

ited. In this case, have the vehicle 
inspected by a professional work

-

shop. Kia recommends to visit an 
authorised Kia dealer/service partner.

When the outside rear view mirror 
warning light is not working prop

-

erly, the 䳒Check outside mirror 
warning icon䳓 warning message will 
appear on the cluster. In this case, 
have the vehicle inspected by a pro

-

fessional workshop. Kia recom

-

mends to visit an authorised Kia 
dealer/service partner.

Function disabled

When the rear bumper around the 
rear corner radar or sensor is cov

-

ered with foreign matters, such as 

OBD041638R

OBD041639R

OBD041640R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands