Kia Cerato 2021 Manual Download Page 378

Page: 378 / 714

Driving your vehicle

Brake system

cle to a professional workshop
and have the system checked. Kia
recommends to visit an
authorised Kia dealer/service
partner.

WARNING

To reduce the risk of an accident, do
not activate Auto Hold whilst driving
downhill, backing up or parking your
vehicle.

If there is a malfunction with the
driver's door, trunk/tailgate or
engine bonnet open detection sys

tem, the Auto Hold may not work
properly.

Take your vehicle to a professional
workshop and have the system
checked. Kia recommends to visit an
authorised Kia dealer/service part

ner.

NOTICE

A click or electric brake motor whine
sound may be heard whilst operat

ing or releasing the EPB, but these
conditions are normal and indicate
that the EPB is functioning properly.

Warning messages

The Auto Hold function will display a
warning message with sound under
certain conditions.

When the EPB is applied from Auto
Hold, a warning will sound and a
message will appear.

When the conversion from Auto
Hold to EPB is not working properly
a warning will sound and a message
will appear.

NOTICE

When this message is displayed, the
Auto Hold and EPB may not operate.
For your safety, press the brake
pedal.

If you do not apply the brake pedal
when you release the Auto Hold by

OBD041227R

OMQ4050055R

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands