Kia Cerato 2021 Manual Download Page 211

Page: 211 / 714

115

Features of your vehicle

Reverse Parking Distance Warning (PDW)

- Installing the license plate dif

ferently from the original loca

tion

- The vehicle bumper height or

sensor installation has been
modified.

- Any non-factory equipment or

accessories have been installed.

䳜 The function will operate normally

when such foreign matters are
removed.

䳜 The following objects may not be

detected:
- Sharp or slim objects, such as

ropes, chains or small poles

- Objects, which tend to absorb

sensor frequency, such as
clothes, spongy material or
snow

- Objects smaller than 100 m (40

in) in length and narrower than
14 cm (6 in) in diameter

- People, animal or objects

located very close to the sen

sor.

䳜 The indicator may operate differ

ently when the people, animal or
obstacle is located between sen

sors.

䳜 Parking Distance Warning may

not occur sequentially depending
on vehicle speed or obstacle
shape.

䳜 Have the function be checked by

an authorised Kia dealer/service
partner.

Function settings

Warning volume

With the ignition switch or the
ENGINE START/STOP button in the
ON position, select 'Driver assistance

→ Warning volume' from the Set

tings menu to change the warning
volume to 'High', 䳒Medium䳓 or 䳒Low䳓 for
Reverse Parking Distance Warning.

If you change the warning volume,
the warning volume of other Driver
Assistance functions may change.

Function operation

Operating conditions

䳜 Reverse Parking Distance Warning

activates when the gear is R
(Reverse) position.

䳜 Reverse Parking Distance Warning

assists the driver during reverse
movement of the vehicle by chim

ing if any people, animal, or object
is sensed when the vehicle speed
is below 10km/h (6mph).

䳜 When an obstacle is detected, it is

displayed on the cluster and info

tainment function screen.

䳜 When more than two objects are

detected at the same time, the
closest one will be alerted with an
audible warning.

Types of warning sound and indica

tor

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands

Kia Cerato 2021, Manual

Search results

Summary of Contents for Cerato 2021

Reviews:

Brands by name

Popular brands