manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 53

31

3

3

Safety features of your vehicle

Seat belts

Seat belt precautions

WARNING

All occupants of the vehicle must 
wear their seat belts at all times. 
Seat belts and child restraints 
reduce the risk of serious or fatal 
injuries for all occupants in the 
event of a collision or sudden stop. 
Without a seat belt, occupants could 
be shifted too close to a deploying 
air bag, strike the interior structure 
or be thrown from the vehicle. 
Properly worn seat belts greatly 
reduce these hazards.
Always follow the precautions about 
seat belts, air bags and occupant 
seating contained in this manual.
Never wear a seat belt over fragile 
objects. If there is a sudden stop or 
impact, the seat belt can damage it.

Infant or small child

You should be aware of the specific 
requirements in your country. Child 
and/or infant seats must be prop

-

erly placed and installed in the rear 
seat. For more information about 
the use of these restraints, refer to 
"Child restraint system (CRS)" on 
page 3-34.

WARNING

Every person and animal in your 
vehicle needs to be properly 
restrained at all times, including 
infants and children. Never hold a 
child in your arms or lap when riding 
in a vehicle. The violent forces cre

-

ated during a crash will tear the 
child from your arms and throw the 
child against the interior. Always use 
a child restraint appropriate for 
your child's height and weight.

NOTICE

Small children are best protected 
from injury in an accident when 
properly restrained in the rear seat 
by a child restraint system that 
meets the requirements of the 
Safety Standards of your country. 
Before buying any child restraint 
system, make sure that it has a 
label certifying that it meets Safety 
Standards of your country. The 
restraint must be appropriate for 
your child's height and weight. 
Check the label on the child restraint 
for this information. Refer to "Child 
restraint system (CRS)" on page 3-
34.

Larger children

Children who are too large for child 
restraint systems should always 
occupy the rear seat and use the 

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands