manualshive.com logo in svg

Kia Cerato 2021, Manual

Share
Download
Kia Cerato 2021 Manual Download Page 1

FOREWORD

Dear Customer,

Thank you for selecting your new Kia vehicle.

As a global car manufacturer focused on building high-quality vehicles with excep

-

tional value, Kia Motors is dedicated to providing you with a customer service experi

-

ence that exceeds your expectations.

If technical assistance is needed on your vehicle, authorised Kia dealerships factory-
trained technicians, recommended special tools, and genuine Kia replacement parts.

This Owner's Manual will acquaint you with the operation of features and equipment 
that are either standard or optional on this vehicle, along with the maintenance 
needs of this vehicle. Therefore, you may find some descriptions and illustrations not 
applicable to your vehicle. You are advised to read this publication carefully and follow 
the instructions and recommendations. Please always keep this manual in the vehicle 
for your, and any subsequent owner's, reference.

All information contained in this Owner's Manual was accurate at the time of publica

-

tion. However, as Kia continues to make improvements to its products, the company 
reserves the right to make changes to this manual or any of its vehicles at any time 
without notice and without incurring any obligations.

Please drive safely, and enjoy your Kia vehicle!

 2021 KIA MOTORS Korea, Inc.

All rights reserved. May not be reproduced or translated in whole or in part without the written consent of Kia 
Motors Korea, Inc.

Printed in Korea

Summary of Contents for Cerato 2021











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands