
Jabiru J450 Constructors Manual
Testing>Final inspection checklist
Tuesday, April 6, 2010
322 of 343
Empennage
Elevator Deflections
1
UP
________ degrees, or touches the UP template
2
DOWN ________ degrees, or touches the DOWN template
3
2mm clearance to the stop on fuselage at full DOWN deflection
Elevator
1
Hinge pins and retainers secure
2
Rod ends secure
3
Safety in rod ends within limits
4
Jam nuts on rod ends secure
5
Cable anchor secure and correct position in clamp
6
Drive plate secure
7
Rod end free play at full deflections
8
End-plug not touching end-cap full deflection down
9
Elevator min 2mm clear of stabiliser channel
10
Elevator cannot bind on horizontal stabiliser channel
Trim
1
Pivots secure
2
Spring rod
a)
split pins secure
b)
springs lubricated
c)
black block secure and free
d)
rod ends secure
e)
safety hole within limit
f)
jam nuts secure
g)
rod end free at full deflections
3
Trim cable
a)
cable anchor secure and correct position in clamp
b)
rod ends secure
c)
safety hole in rod ends within limits
d)
jam nuts on rod ends secure
e)
rod end free at full deflections