![background image](http://html1.mh-extra.com/html/jabiru/j450/j450_constructors-manual_3129834310.webp)
Jabiru J450 Constructors Manual
Testing>Final inspection checklist
Tuesday, April 6, 2010
310 of 343
Spark Plugs/Coil leads
1
Spark plugs are secure in cylinder heads
2
Spark plug leads are secure on spark plugs
3
Spark plug leads not rubbing (on air ducts, cylinder heads)
4
Terminal nuts are secure
5
CHT sender (12mm terminal) secure
6
Spark plug leads secure in distributor caps
7
16 gauge earth wire secure and clipped to each coil
Ram Air Ducts
1
Baffles in place
2
Cap screws secure through ducts to cylinder heads
3
Springs in place inboard side of ducts
4
Spring lock-wire correct and secure
5
Check alignment of rubber front lip with the top cowl
6
Air ducts not touching the underside of the top cowl or oil door hinge
7
Cooling tubes directed onto coils
Engine Oil
1
Oil level correct (capacity: 2200 = 2.3 litres, 3300 = 3.5 litres)
2
Sump plug tightened and lock wired
3
Oil filter secure (spin on filter, hand pressure only)
4
Oil cooler bracket secured to engine
5
Oil cooler secured to bracket
6
Oil cooler hose clamps secure x 4
7
Check oil hose routing
8
Fire sleeve secure and lock wired over hose clamps
9
Oil breather hose and oil bottle secure
Throttle cable
1
Cable lock nuts secure on both ends of cable
2
Cable end free in carburettor link
3
Split pins secure
4
2 x 5/16 washers between cable and carburettor link
5
Cable alignment correct with outer at both ends
6
Cable adjustment
a)
full throttle
b)
idle