ITT PumpSmart PS220, Configuration And Operation Manual

Page: 282 / 300

PS220 Configuration & Operation Guide
281 PS220
Parameter
Listing
99.06 MOTOR NOMINAL CURRENT Defines the nominal motor current. Must be equal to the value on the motor rating plate.
If multiple motors are connected to the drive, enter the total current of the motors.
Notes:
• Correct motor operation requires that the magnetizing current of the motor does
not exceed 90% of the nominal current of the drive.
• This parameter cannot be changed while the drive is running.
99.07 MOTOR NOMINAL VOLTAGE
Defines the nominal motor voltage supplied to the motor. This setting must match the
value on the rating plate of the motor. This parameter cannot be changed while the drive
is running.
99.08 MOTOR NOMINAL FREQUENCY Defines the nominal motor frequency. This setting must match the value on the rating
plate of the motor.
This parameter cannot be changed while the drive is running.
99.09 MOTOR NOMINAL SPEED Defines the nominal motor speed. The setting must match the value on the rating plate of
the motor.
This parameter cannot be changed while the drive is running.
99.10 MOTOR NOMINAL POWER Defines the nominal motor power. The setting must match the value on the rating plate
of the motor. The unit is selected by parameter 96.16, Unit selection. This parameter
cannot be changed while the drive is running.
99.16 Motor Phase Order Define how the drive fires the IBGT for the output phase of the motor. Choices are :
UWV
UVW. Used to correct Motor rotation.
99.XX
Parameters
not shown
Refer to the ABB ACS880 Firmware
manual
Reference the ABB ACS880 Firmware Manual for parameter definition. All ACS880
parameters may not be supported.