ITT PumpSmart PS220, Configuration And Operation Manual

Page: 80 / 300

PS220 Configuration & Operation Guide
79 PS220
Multipump
1. Configure the Multipump Mode.
1. “ARROW RIGHT” To change
2. “ARROW UP/DOWN” to change
3. “Save”
4. “NEXT”
2. Configure the Pump Address(S).
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
NOTES:
1. This Pump address MUST be entered in same fashion as the PS220’s are wired with the D2D connections. Refer to
the wiring diagrams in this manual. They must be wired in the 1-2-3-4-5-6 ring configuration.
3. Configure the Lead/Lag Switch Hours.
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “Next”
4. Configure the Value Increase and Decrease Values:
The defaults are 5%
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”