ITT PumpSmart PS220, Configuration And Operation Manual

Page: 32 / 300

PS220 Configuration & Operation Guide
31 PS220
SmartFlow
3. Two Rated Specific Gravities (Dual):
Any available unused digital input can be configured to toggle between two
predefined Specific Gravity values. SG 1 and SG 2.
The steps you will need to perform are:
1. Configure the Digital Input to be used:
2. Configure the Min SG value (SG1)
3. Configure the Min SG value (SG2)
4. Proceed to SmartFlow Tune
1. Configure the Digital Input to be used.
1. “ARROW UP/DOWN” Highlight “DI” 1. “Next” 1. “ARROW UP/DOWN”
2. “Select”Up”
2. Configure the Min SG value.
1. “ARROW RIGHT” to change
2. “ARROWS” to change value
3. “Save”
4. “Arrow Down”
3. Configure the Max SG:
1. “ARROW RIGHT” to change
2. “ARROWS” to change value
3. “Save”
4. “Next”
4. Proceed to SmartFlow Tune
1. “No” Or “Yes” to proceed to
Smartflow Tune
2. “Select”