ITT PumpSmart PS220, Configuration And Operation Manual

Page: 98 / 300

PS220 Configuration & Operation Guide
97 PS220
W
ater
Functions
2. Configure the Pipe Clean Time interval.
This is the time interval used for step 1B. The default is 100 Hours.
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
3. Configure the Pipe Clean Cycle Time.
This is the total time that the Cleaning Cycle will run. The default is 600 Seconds (10 Minutes).
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “Next”
4. Exit the Wizard
Select “NO”