ITT PumpSmart PS220, Configuration And Operation Manual

Page: 33 / 300

PS220 Configuration & Operation Guide
PS220 32
SmartFlow
2.2. Advanced SmartFlow & Smart TDH
Configuration Wizard
Please refer to the Features & Functions section in this manual for a detailed
explanation of this functionality. This Wizard will show the step-by-step in-
structions to configure this functionality for use.
To access this Wizard, from the Home Screen follow the path: Menu>PS220
Configuration> Smartflow> Advanced Smartflow>
1. The steps to be performed to configure Advanced SmartFlow and for
SmartTDH are:
1. Configure the Flow Unit (Same as Basic)
2. Configure the Pump Specific Properties (Same as Basic)
3. Configure the Calculation Method (Specific for Advanced)
4. Configure the Pumping System Information (More Info Required)
5. Configure Transmitter(s) and Analog Input(s) (More info required)
6. Configure Fluid Specific Gravity (Same as Basic)
Note: Steps 1, 2, & 6 will not be shown as they are identical to the Basic
Smartflow configuration. These steps are not shown below. Please refer to
Basic Smartflow for additional detailed information in the Index, or you can
start with the Basic Smartflow Configuration Wizards and add these steps as
you progress.
The Screen Shots that follow will show you step by step as you progress, from
start to finish, how to configure this functionality.