ITT PumpSmart PS220, Configuration And Operation Manual

Page: 43 / 300

PS220 Configuration & Operation Guide
PS220 42
Process Control
2. Configure the Unit Selection
The configuration of the PumpSmart PS220’s unit selection will determine the labeling used to control
the pump, the setpoint, and the actual feedback from the transmitter. Following are the available units
based on your selection in 1 above. (The defaults shown are for English)
PSI (DEFAULT)
M- Meters
BAR
FT–FEET
MPa – Mega Pascals
Pressure: Smart TDH
Ft – Feet (DEFAULT)
M – Meters In – Inches
Cm – Centimeters
Level
PM – Gallons per
Minute (DEFAULT)
M³/hr. – Cubic
meters per hour
BPH – Barrels Per
Hour
L/s – Liters per
second
Flow: Smartflow
Temperature
°F – Degrees Fahrenheit (DEFAULT)
°C – Degrees Celsius