ITT PumpSmart PS220, Configuration And Operation Manual

Page: 52 / 300

PS220 Configuration & Operation Guide
51 PS220
Process Control
2. Configure the Decel Time.
The default for this setting is 5 seconds. It can be adjusted as necessary. Range is from 0-1800 seconds.
1. “ARROW RIGHT” to change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
NOTE: Both the accel and decel times should be adjusted to the same values when
any changes are being made for the tuning to be most effective.
3. Configure the Proportional Gain.
The default for this setting is 1.3. The range is from .1 to 100. The lowest increment is .1.
1. “ARROW RIGHT” to change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
4. Configure the Integral Time.
The default for this setting is .30. The range is 0 to 32767.
1. “ARROW RIGHT” to change
2. “ARROWS” to change value
3. “Save”
4. “Next”