ITT PumpSmart PS220, Configuration And Operation Manual

Page: 66 / 300

PS220 Configuration & Operation Guide
65 PS220
Pump & VFD Protection
NOTE:
1. When Selecting Proc. Trans 1, the Wizard will ask you to confirm all of the settings for its use. You will need to:
1. Confirm the AI it is wired to.
2.Confirm the Min. scaling, Max. Scaling, and the units
2. When Selecting Proc. Trans 2, (if it has not already been configured previously) the Wizard will ask you to:
“Save”
1. Configure the AI it is wired to.
1. “Arrow Up/Down” to select.
2. “Select”
2. Configure the AI Min. scaling.
1. “Arrow Right”
2. “Arrow Up/Down” to change
3. “Save”
4. “Arrow Down”
3. Configure the AI Max. Scaling.
1. “Arrow Right”
2. “Arrow Up/Down” to change
3. “Save”
4. “Arrow Down”