ITT PumpSmart PS220, Configuration And Operation Manual

Page: 14 / 300

PS220 Configuration & Operation Guide
13 PS220
Basic Startup
2. Perform a Motor Jog for Direction
Jogging the pump motor for correct rotation can be accomplished through the Motor Jog function.
The PumpSmart PS220 will rotate at 60 RPM and continue to do so until the rotation is confirmed to
be correct (or incorrect). If incorrect the drive will prompt you to correct the rotation and then ask you
to start it again to then confirm that rotation is correct. It will always only operate at 60RPM.
Note. There is no need to change any wiring on the (motor) load side of the PS220 to correct the rota-
tion. It is all done by an internal PumpSmart PS220 setting.
Never work on the PumpSmart PS220, the motor cable or the motor when main power
is applied. After switching off the input power, always wait 5 minutes to allow drive
internal capacitors to discharge before working on the drive, the motor, or the motor
cable. Failure to do so may result in serious injury or death.
DANGER
The Screen Shots below follow the sequence when the initial rotation is
incorrect. If it is correct the only screens 1, 2, 3, and 8 will apply.
1. 2. 3.
4. 5. 6.
7. 8.