ITT PumpSmart PS220, Configuration And Operation Manual

Page: 35 / 300

PS220 Configuration & Operation Guide
PS220 34
SmartFlow 2. Configure the BEP TDH
This is the Total Dynamic Head at the Best Efficiency Flow AND at the rated speed of the Pump.
1. “ARROW RIGHT” to change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
3. Configure the SO TDH.
The pump Total Dynamic Head at the Shutoff (zero flow) condition AND at rated speed.
1. “ARROW RIGHT” to change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
4. Configure the SUCTION DIA.
The pumps Suction Flange Diameter.
1. “ARROW RIGHT” to change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
5. Configure the DISCHARGE DIA.
The pumps Discharge Flange Diameter
1. “ARROW RIGHT” to change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”