ITT PumpSmart PS220, Configuration And Operation Manual

Page: 68 / 300

PS220 Configuration & Operation Guide
67 PS220
Pump & VFD Protection
3. Configure the Condition 1 Response.
1. “Arrow Right” to change
2. “Arrows UP/DOWN” to Define
3. “Save”
4. “Arrow Down”
Once you configure the response you may receive this message. Select “Hide” and continue.
You may have to change the configuration of Parameter 80.19 to allow the Response to the Monitoring of
the values when the PumpSmart PS220 is either; “When Running”, or “Always”. The default is “Always”
This change will need to be done manually by accessing that specific parameter directly.
From the Home Screen follow the path: Menu>Parameters>Complete List>Arrow Down to
GROUP 80>80.19> Edit>Save
See the screen shots below:
1. “Arrow Right” to change
2. “Arrows UP/DOWN” to Define
3. “Save”
4. “Back” – 3 times