ITT PumpSmart PS220, Configuration And Operation Manual

Page: 74 / 300

PS220 Configuration & Operation Guide
73 PS220
Pump & VFD Protection
1. “ARROW RIGHT” To change
2. “ARROWS” right to change Bit value
3. “ARROW DOWN” to next Bit (repeat step 2)
3. “SAVE” to continue
4. “NEXT”
5. Configure the Autoreset selection:
The default for all each is Disabled. (Bit in BOLD is set to 0 = Disabled)
6. Configure the Number of trials.
The default is 0
1. “ARROW RIGHT” To change
2. “ARROWS UP/DOWN” to change
3. “Save”
4. “ARROW DOWN”
7. Configure Total trials time:
1. “ARROW RIGHT” To change
2. “ARROWS UP/DOWN” to change
3. “Save”
4. “ARROW DOWN”