ITT PumpSmart PS220, Configuration And Operation Manual

Page: 73 / 300

PS220 Configuration & Operation Guide
PS220 72
Pump & VFD
Protection
2. Configure Maximum current:
1. “ARROW RIGHT” To change
2. “ARROWS UP/DOWN” to change
3. “Save”
4. “ARROW DOWN”
This value should only be changed after consulting with an ITT Monitoring
and Control Application Engineer, or ITT Commissioning Engineer.
CAUTION
3. Configure the Overvoltage control:
The default is set to ON
1. “ARROW RIGHT” To change
2. “ARROWS UP/DOWN” to change
3. “Save”
4. “ARROW DOWN”
4. Configure the Undervoltage control.
The default is ON
1. “ARROW RIGHT” To change
2. “ARROWS UP/DOWN” to change
3. “Save”
4. “ARROW DOWN”