ITT PumpSmart PS220, Configuration And Operation Manual

Page: 85 / 300

PS220 Configuration & Operation Guide
PS220 84
M
ul
tiv
ari
ab
le
4. Configure the Limits of Operation
The limits of operation define the full interaction between the Analog Input you have selected in the previous step
with the Primary Reference. Please refer to the example at the end of this section for assistance with the individual limit
steps. There are 6 individual steps that will need to be configured listed as A through F. They are:
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
A. Configure the Level 1
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
B. Configure the SPT LO
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
C. Configure the LO INTRCPT
1. “ARROW RIGHT” To change
2. “ARROWS” to change value
3. “Save”
4. “ARROW DOWN”
D. Configure the LEVEL 2