ITT PumpSmart PS220, Configuration And Operation Manual

Page: 83 / 300

PS220 Configuration & Operation Guide
PS220 82
M
ul
tiv
ari
ab
le
6. Multivariable Control Wizard
The PumpSmart PS220’s Multivariable Control function will allow the Primary
Process Controls Setpoint to be varied, and or offset, with a second process
transmitters signal.
Note:
1. This is only available for Single Pump Applications.
2. This message will be displayed if you have not run the Basic Startup and
Process Control Wizards prior to configuring Multivariable Control.
Please refer to the Features & Functions section in this manual for a detailed
explanation of this functionality. This Wizard will show the step-by-step
instructions to configure this functionality for use. This functionality will re-
quire a transmitter and an additional available Analog Input. This wizard will
completely configure this as you proceed. This functionality can be configured
with the PumpSmart PS220 Configuration Wizard. To access this Wizard from
the Home Screen, follow the path: Menu>PS220 Configuration>Multivari-
able>
The individual steps that will be performed are:
1. Enable the Multivariable Control Functionality
2. Configure the source for the Secondary process transmitter
3. Configure the Scale of the Secondary process transmitter
4. Configure the Limits of Operation
5. Exit the Wizard
The Screen Shots that follow will show you step by step, from start to finish,
how to configure this functionality.