ITT PumpSmart PS220, Configuration And Operation Manual

Page: 11 / 300

PS220 Configuration & Operation Guide
PS220 10
Basic
Startup
1.1 Motor Parameter Configuration
Wizard
The PumpSmart PS220 will not operate unless the Electric Motor connected is
configured with all necessary information required.
To access this Wizard, from the Home Screen follow the path: Menu>PS220
Configuration>Basic Startup>Edit Motor Parameters>
The steps that you will perform are as follows:
1. Configure the Motor Setup
2. Perform the Motor ID Run
3. Perform a Motor Jog for Direction
The Screen Shots that follow will show you step by step, from start to finish as
you progress, how to configure this functionality.
1. Configure the Motor Information
All this information can usually be found on the Motor Nameplate that should be
physically attached to the Motor.
If the Nameplate is not available, you cannot proceed to any of the next steps.