ITT PumpSmart PS220, Configuration And Operation Manual

Page: 57 / 300

PS220 Configuration & Operation Guide
PS220 56
Pump & VFD
Protection
4. Continue Basic Pump Protection
1. “Select No”
5. Continue to 4.5 “Protection Options” on page 110.
4.2 Advanced Pump Protection Wizard
The Advanced Pump Protection functionality uses the fully array of the PumpSmart PS220’s feedback
from SmartFlow and Smart TDH in identifying upset conditions that may occur in the system.
This configuration will use the values of Dry Run, Minimum Flow and Runout Flow, along with the
responses you establish, to define the systems reaction to these events.
Please refer to the Features & Functions section in this manual for a detailed explanation of this func-
tionality. This Wizard will show the step-by-step instructions to configure this functionality for use.
This functionality can be configured with the PumpSmart PS220 Configuration Wizard. To access this
Wizard from the Home Screen, follow the path: Menu>PS220 Configuration>Pump & VFD Protec-
tion>Pump Protection>No> Follow the prompts
The description, along with the screenshots below, will show the steps you will take from start to
finish to configure this functionality.
The individual steps that will be performed are:
1. Configure the choice for Advanced Pump Protection.
2. Configure the Flow feedback source.
3. Configure the Response to Minimum Flow.
4. Configure the Minimum Flow Value.
5. Configure the Dry Run Response.
6. Configure the Runout Flow Response.
7. Configure the Runout Flow Value.
1. Configure the choice for Advanced Pump Protection.
1. “Select Yes”