ITT PumpSmart PS220, Configuration And Operation Manual

Page: 106 / 300

PS220 Configuration & Operation Guide
105 PS220
I/O
Configuration
8.1.2 Analog Output Configuration Wizard.
To configure an Analog output from the Home Screen follow the path: Menu>PS220 Configuration>I/O Configuration>-
No (or Yes if you are configuring the FIO-11optional Extension Module for the first time)>Analog I/O>Select>Next
The steps that you will perform for each Analog Input:
1. Choose the AO by numbers Source.
2. Configure the Scaled Min value for the AO.
3. Configure the Scaled Max value for the AO.
4. Configure the Min value in MA for the Min value.
5. Configure the Max Value in MA for the max value.
6. Exit the Wizard.
The Screen Shots that follow will show you step by step as you progress, from start to finish as you progress, how to
configure this functionality.
1. Choose the AO by numbers Source.
AO1 AO2 CHOICES
1. “ARROW RIGHT” To change
2. “ARROW UP/DOWN” to select
3. “SAVE”
4. “ARROW DOWN”
2. Configure the Scaled Min value for the AO.
1. “ARROW RIGHT” To change
2. “ARROW UP/DOWN” to select
3. “SAVE”
4. “ARROW DOWN”