Hioki 8847, Instruction Manual

Page: 91 / 372

5.5 Managing Files
81
5
Chap
ter
5
Sav
ing
/Loadi
ng
Dat
a &
Managi
ng Fi
les
You can save settings data or waveform data on storage media. Data will be saved in the folder indi-
cated by the cursor. By using the A/B cursor pair, waveform data can be saved partially.
5.5.1 Saving
Procedure
To open the screen: Press the
FILE
key
→
File screen To change the media: (

p.66)
3
4
5
6
1
Select storage media for saving.
See: "To change the media" (

p.66)
2
Move the cursor into the folder to save.
3
Set the data to save.
Select [Save] and then select [Save Type] .
4 Set the file name.
Move the cursor to the
[Save Name]
item.
Enter the save name.
See: "8.1.3 Alphanumeric Input" (

p.121)
5 Specify the action if a file with the same name exists in the
target folder.
Move the cursor to the [Same Name] item.
Select
6
(When [Wave Binary] is the selected save type)
Select whether to save divided files.
Move the cursor to the [Division] item.
Select
See: "About divided saving" (

p.82)
Setting Settings data
Wave Binary Waveform data (Binary)
Wave Text Waveform data (Text)
(Memory/Recorder Function only)
Auto When saving with the same file name, a 4-digit number is au-
tomatically added to the beginning of the file name. If the first
character of the file name is a numeral, the added number
will continue sequentially from there.
Overwrite If a file with the same name exists, it will be overwritten by
the new file.
Error If a file with the same name exists, an error message will be
shown.
Off Files are not divided when saved. If a file is too large, it can-
not be saved.
16M, 32M Select the size for Divided Save.
2
• The "Text" option is only for
loading the data to a PC.
Data saved with this option
cannot be loaded back into
the 8847. To reload the data
later into the 8847, use the
"Binary" option.
• When [Memory (Int)] is
selected as storage media,
only settings data can be
saved.