Hioki 8847 Instruction Manual Download Page 103

Page: 103 / 372

6.3 Manual Printing With PRINT key (Selective Printing)

Chapt

er 6

Pri

ing

Using the

PRINT

key from the Waveform screen, you can specify a range and data type for printing.

This is also useful to prevent inadvertent printing due to operation errors.

6.3

Manual Printing With PRINT key (Selective
Printing)

Procedure

To open the screen: Press the

SYSTEM

key

→

[Printer]

sheet

Enable data selection at time of printing

Move the cursor to the

[Select at print]

item.

Select

[Yes]

Make print settings as required for the printer. (



p.95)

Procedure

To open the screen: Press the

DISP

key

→

File screen

Start and stop the measurement.

Press the

START

key to start the measurement.

Press the

STOP

key to finish the measurement.

During measurement, printing is not possible. Measurement must be stopped be-
fore starting to print.

Select print contents and execute printing

When you press the

PRINT

key, the "PrintSelect" GUI appears

on the right side of the screen.

Select

When the selection (except for

[Cancel]

) has been made, printing starts.

To stop printing before it has finished:
Press the

STOP

key.

Whole
Wave

Print all waveform data in internal memory of instrument. (default
setting)

A-B Wave

Print only A/B cursor defined range of waveform data in internal
memory of instrument. (Memory Function and Recorder Function

only)

About Trig Print waveform data for 10 divisions before and after trigger posi-

tion. (Memory Function only)

List

Print main settings.

Report

Print the report.

See: "6.6.2 Report Print (A4 Size Print)" (



p.98)

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands