Hioki 8847 Instruction Manual Download Page 164

Page: 164 / 372

9.3 Triggering by Analog Signals

154

The steps for making settings and selecting the type of analog trigger are described below.
The Trigger settings window (

[Analog Trg.]

sheet) is used.

9.3

Triggering by Analog Signals

9.3.1 Analog Trigger Settings and Types

Procedure

To open the screen: Press the

DISP

key

→

Waveform screen

→

Press the

TRIG.SET

key

→

Trigger settings

window (

[Analog Trg.]

sheet)

Move the cursor to the

[Type]

item of the channel for which to make the setting.

Select the trigger type with the

keys.

Move the cursor to the parameter item with the

CURSOR

keys.

Select the parameter value with the

keys.

1. Level Trigger (



p.155)

2. In-Window Trigger

Out-of-Window Trigger (



p.155)

3. Voltage Sag Trigger (



p.156)

4. In-Period Trigger

Out-of-Period Trigger (

5. Glitch Trigger (

To copy the setting to another channel

The Trigger settings window (

[Analog Trig]

sheet) can be used to copy a setting.

See:

"8.9 Copying settings to other channels (calculation No.) (Copy function)" (



p.139)

When the FFT function is used and

[Reference]

item on the

[Status]

sheet is

set to

[From Memory]

, an analog trigger cannot be set.

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands