Hioki 8847 Instruction Manual Download Page 123

Page: 123 / 372

7.6 Monitoring Input Levels (Level Monitor)

113

Cha

ter
7 W

vefo

Scr

een Monit

ring and Anal

ysi
s

All input waveform levels can be monitored in real time.
Analog channels and logic channels can be displayed at the same time.

7.6

Monitoring Input Levels (Level Monitor)

Display Menu

Procedure

To open

the Menu

: Press the

DISP

key

→

Display Menu

Monitor values of analog and logic channels

Analog channel
level display

To hide the level monitor:

Select

[Monitor]

again.

Selecting

[Monitor]

brings up the analog chan-

nel level display in the left part of the Waveform
screen, and the logic channel level display in the
right part of the Waveform screen.

Display format 2 - 8 screens (



p.48)

Level monitors are displayed for each graph.

Upper and lower limit indication is combined with
level monitor.

See:

"7.7.1 Showing Upper/Lower Limit On Waveform
Screen" (



p.114)

Logic channel
level display

Level display of an analog channel

High

Hi gh& Low

Low

Input
Level

Waveform Display
Range Full Span

Level display of logic channels

How to View a Level Monitor

When the display setting is On,
the part indicated in white takes
the color specified for the wave-
form display. When the setting is
Off, the part becomes gray. The
part indicated in black takes the
background color.

• Input levels are not displayed for channels having no corresponding input mod-

ule installed.

• Channels higher than the number specified for

[Used Ch]

do not display the

analog input level.
(Example: When

[Used Ch]

is set to

[Ch1-4]

, the level for channel 5 and

higher numbers is not displayed.)

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands