Hioki 8847 Instruction Manual Download Page 144

Page: 144 / 372

8.6 Variable Function (Setting the Waveform Display Freely)

134

The waveform height and display position can be arbitrarily set along the vertical axis

(voltage axis)

The following two setting methods are available:

• Set the displayed amplitude per division (1div setting)

Set the amplitude to be displayed per vertical division and the zero position of
the waveform on the vertical axis (voltage axis).

• Set the Upper and Lower Limits (Upper-Lower setting)

The upper and lower limits on the vertical axis (voltage axis) can be set to dis-
play the waveform amplitude full-screen.

Settings for the Variable function can be made for each individual channel, using
the

[Each Ch]

sheet accessed from the Channel screen (



p.135), or for all

channels using the Display range window (



p.135).

8.6

Variable Function (Setting the Waveform Dis-
play Freely)

Precautions for using the Variable Function

• Verify that the vertical axis (voltage axis) range is set properly for the input sig-

nal.

• The vertical axis (voltage axis) range is unaffected by changes to the upper

and lower limits made by the Variable setting.

Normal Waveform

Variable Function (Per-Division setting)

10V

Per Division: 1 V
Zero Position: 0%

Normal Waveform

Variable Function (Set Upper/Lower Limits)

10V

Upper Limit: 10 V
Lower Limit: 0 V

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands