Hioki 8847 Instruction Manual Download Page 131

Page: 131 / 372

8.1 Adding Comments

121

Chapt

er 8

Ut
ilit

y Funct

ions

Move the cursor to the setting item for which to make the input, and choose the content with the

keys.

Move the cursor to the comment field and select

[Enter Char]

A virtual keyboard appears.

Select a character with the

CURSOR

key from the virtual keyboard, and select

[Enter Char]

to enter it.

Select

[Confirm]

to accept the entry.

Press the

ESC

key to cancel the input.

(Pressing the

ESC

key again closes the virtual keyboard)

8.1.3 Alphanumeric Input

Entering Text

RESET

: Deletes all entered characters (Move the cursor to the

RESET

, and push the

[Enter Char]

SPACE

: Inserts a space (Move the cursor to the

SPACE

, and push the

[Enter Char]

OVWR/INS

: Toggles between Overwrite (OVWR) and Insert (INS) mode (Move the cursor to the

[OVWR/INS]

, and push the

[Enter Char]

to switch OVWR/INS)

: Move the character input position left.

: Move the character input position right.

Character input position

Move with Jog knob, or

<< >>

Character selection cursor

Move with

CURSOR

keys.

Entering units and symbols
Characters entered at the unit may be saved differently.
Save (saving of numerical calculation results or text format information)

→

^2,

→

~u,

→

~o,

→

~e, °

→

~c ,

→

~+,

με

(display only)

→

uE, °C (display only)

→

Characters not allowed in the file name have been detected. (Please use only
uppercase letters.)

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands