Hioki 8847, Instruction Manual

Page: 56 / 372

3.4 Setting Measurement Configuration
46
Set the length (number of divisions) to record each time data is acquired.
3.4.3 Recording Length (number of divi-
sions)
Procedure
To open the screen: Press the DISP key
→
Waveform screen
Memory Function case
1
Move the cursor to the [Shot] item.
2
Select the type. Select
3
Set the recording length. Select
(Fixed Shot)
(User Shot)
Fixd Shot Select from a a range of preset values.
User Shot Freely specify any value in 1-division units.
25, 50, 100, 200, 500, 1000, 2000, 5000, 10000, 20000 div,
50000 div (2, 4, 8 channel mode),
100000 div (2, 4 channel mode),
200000 div (2 channel mode)
1 to 40000 div (16 channel mode)
1 to 80000 div (8 channel mode)
1 to 160000 div (4 channel mode)
1 to 320000 div (2 channel mode)
Recorder Function case
1
Move the cursor to the [Shot] item.
2
Select the type. Select
3
Set the recording length. Select
(Fixed Shot)
(User Shot)
Fixd Shot Select from a a range of preset values.
User Shot Freely specify any value in 1-division units.
Cont. When [On] is selected, measurement is carried out while
continuously overwriting data in memory. At the point
where measurement is stopped, data for the preceding
20,000 divisions can be saved and printed again.
25, 50, 100, 200, 500, 1000, 2000, 5000, 10000, 20000 div
1 to 20000 div