Hioki 8847 Instruction Manual Download Page 119

Page: 119 / 372

7.4 Performing Waveform X-Y Synthesis

109

Cha

ter
7 W

vefo

Scr

een Monit

ring and Anal

ysi
s

Procedure

To open the screen: Press the

DISP

key

→

Waveform screen

→

Press the

CH.SET

key

→

X-Y settings window

Set the waveform color in the graph display.

Select

Move the cursor to the for which you want to set the
color, and make the selection.

You can also select the same color as for another channel.

Select the channels for X-Y synthesis.

Move the cursor to the items for the X (time axis) and Y
(voltage axis) and assign a channel.

The same channel can also be assigned multiple times.

Off

Waveform display is off. When a save channel
is specified as display channel, Auto Save will
not be carried out.
"Select the channel to save." (



p.71)

Waveform is displayed. Select the display color
with the

keys

[

↑

]

[

↓

]

Synthesis for A/B section of a waveform

Perform the following steps.
1. Press the

STATUS

key to bring up the Status screen, and select the

[Sta-

tus]

sheet.

2. Select 1, 2, 4, or 8 screens as

[Format]

3. Press the

DISP

key to display the waveform.

4. Use the A/B cursors to specify the range for synthesis. See the following

pages. (

5. Press the

STATUS

key to bring up the Status screen, and select the

[Sta-

tus]

sheet.

6. Select

[X-Y Single]

[X-Y Quad]

for

[Format]

To move pen on synthesized waveform

Press the

WAVE

key so that the key is lit. The pen can now be moved over the

entire waveform with the Jog & Shuttle knobs. The time at the pen position is
shown at the top right of the screen.

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands