Hioki 8847 Instruction Manual Download Page 58

Page: 58 / 372

3.4 Setting Measurement Configuration

You can specify the format in which the input signal is shown on the Waveform screen or printed
out.

With 2, 4, or 8 screens, analog channels can be freely assigned to the respective
graphs.

3.4.4 Screen Layout

Selecting X-Y1 screen or X-Y4 screen allows waveform X-Y synthesis. (This
applies to the Memory function and X-Y recorder function.)

See:

"7.4 Performing Waveform X-Y Synthesis" (



p.108)

Procedure

To open the screen: Press the

STATUS

key

→

[Status]

sheet

Memory Function case

Move the cursor to the

[Format]

item.

Select

Single

Display and record using 1 graph. (default setting)

Dual

Display and record using 2 graphs.

Quad

Display and record using 4 graphs.

Oct

Display and record using 8 graphs.

XYSingle

Set input signal to X-Y and display and record the correlation using 1 graph.

XYQuad

Set input signal to X-Y and display and record the correlation using 4 graphs.

Recorder Function case

Move the cursor to the

[Format]

item.

Select

Single

Display and record using 1 graph. (default setting)

Dual

Display and record using 2 graphs.

Quad

Display and record using 4 graphs.

Oct

Display and record using 8 graphs.

Analog Channel Assignment

Procedure

To open the screen: Press the

CHAN

key

→

[Unit List]

sheet

Move the cursor to the

[Graph]

item.

Select the display screen for each channel.

The sequence is Gr1, Gr2, Gr3... from the top.

Gr1

Gr2

Gr3

Gr4

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands