Hioki 8847 Instruction Manual Download Page 328

Page: 328 / 372

18.4 Self-Test (Self Diagnostics)

318

The following self-test checks are available.

This check tests the instrument's internal memory (ROM and RAM).
RAM contents are unaffected by the ROM/RAM check.

18.4 Self-Test (Self Diagnostics)

Check the instrument's internal memory (ROM and RAM). The results are
displayed on the screen. (



p.318)

Check printing by the printer and clean print heads. (



p.321)

Check the screen display (color check, gradation check). (



p.319)

Check whether instrument keys are functioning correctly. (



p.319)

Check the system configuration. (



p.320)

Procedure

To open the screen: Press the

SYSTEM

key

→

[Init]

sheet

18.4.1 ROM/RAM Check

Move the cursor to the

[ROM/RAM Check]

item.

Select

[

Exec

]

The ROM/RAM check starts.

The following checks are performed in the sequence shown.
Program ROM

→

Address bus

→

Backup RAM

→

Work RAM

→

Video RAM

→

Storage RAM

Do not turn the power off during the check.

To cancel the check:
Press the

STOP

key

The current check is interrupted and the next one starts.
All operation key (except

STOP

key) are disabled during execution of the

check.

The judgment results appear when the check finishes.

: Normal

: Error

ABORT

: When any check is interrupted

If "NG" appears, ask to have the instrument repaired.

Press any key, and the original screen reappears

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands