Hioki 8847 Instruction Manual Download Page 85

Page: 85 / 372

5.2 Saving Data

Chap

ter
5
Sav

ing
/Loadi

Dat

a &

Managi

ng Fi

les

Set the data to save.

Move the cursor to the

[Save Type]

item.

Select

(When Wave Binary or Wave Text was selected)

Set the save area.

Move the cursor to the

[Save Area]

item.

Select

The channel displayed on the screen will be saved.

Set

Save the settings data.

Wave
Binary

Save waveform data in binary format.
Select this to reload the waveform into the instrument.

Wave
Text

Save waveform data in text format.
Select this to use the waveform in a PC. (Memory/Recorder Func-
tion only)

ALL-
Wave Bin

Data of all blocks is saved in binary format. (Only when the mem-
ory division setting is On.)

ALL-
Wave Txt

Data of all blocks is saved in text format. (When the memory divi-
sion setting is On)

Screen
Copy

Save screen display data as a BMP file.
Data saved in BMP format can be displayed on a PC with image
viewing software.

Wave
Image

Save printer output data as a BMP file.
Data saved in BMP format can be displayed on a PC with image
viewing software.

Calc
Result

Save the numerical calculation results. (Memory Function only)

Whole
Wave

Save all recorded data.(default setting)

A-B
Wave

Data between the A/B cursor pair are saved. If only cursor A is

used, all data after the cursor are saved.
(A/B Cursor Specification Method (



p.105))

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands