Hioki 8847 Instruction Manual Download Page 24

Page: 24 / 372

1.4 Basic Key Operations

Press the

CURSOR

key and move the cursor to the item on screen which you

want to change.

Check the GUI illustration and press the function key (

key) for the setting that

you want to change.

The assignment of the

keys will be different for each item.

For some setting items, the

CH.SET

key selects

[Exec]

and the

TRIG.SET

key

selects

[Cancel]

1.4

Basic Key Operations

GUI

Selecting a setting item

Press the

key to change the setting item.

When there are more than six setting items, press

[Next Page]

to switch to the next page.

Increasing or decreasing a setting value

Press

key to change the setting value.

Increase value quickly

Decrease value quickly

To enter text or numbers

See:

"8.1.3 Alphanumeric Input" (



p.121)

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands