Hioki 8847 Instruction Manual Download

Page: 132 / 372

8.1 Adding Comments

122

While the virtual keyboard is displayed, pressing the

WAVE

key brings up a

"Term List" and pressing the

AB CSR

key brings up a "History List".

This can be used to enter preset terms or reuse text from a previous input session.

Move the cursor to the comment field and select

[Enter Char]

The virtual keyboard appears.

(To select from preset terms)

Press the

WAVE

key.

A list of preset terms appears.

(To select from past input)

Press the

AB CSR

key.

A History list appears.

Press the

ESC

key to cancel selection from the history list.

Use the

CURSOR

keys or the Jog knob to select a term from the list, and

select

[Enter Char]

Select

[Confirm]

to accept the entry. The virtual keyboard disappears.

To return the edited field to the original condition, select

[Undo]

Entering Text From a Term List Or History List

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands