Hioki 8847 Instruction Manual Download Page 235

Page: 235 / 372

13.3 Setting FFT Analysis Conditions

225

Chap

ter
13 FFT

Fun

cti
on

The following settings can be made on the Waveform screen.
Changes to the displayed analysis results become effective when the settings are changed.

• Available settings are frequency range, number of analysis points, type of win-

dow function, trigger mode and pre-triggering

• Available settings are analysis number, analysis mode, waveform color, analy-

sis channel and x/y axis display type

• Trigger settings

(



p.154)

(Note: If

[Reference]

[From Memory]

, triggers cannot be set.)

13.3.11Setting and Changing Analysis Conditions on

the Waveform Screen

Trigger mode and Pre-trigger

Select the trigger mode and pre-triggering (same as for
the Memory function).

Trigger Mode: Single, Repeat, Auto
Pre-trigger: Select from list

See:

"9.2 Setting the Trigger Mode" (



p.153)

"9.8 Pre-Trigger Settings" (



p.166)

Number of Analysis Points
(



p.211)

(1000, 2000, 5000, 10000)

Frequency Resolution (dur-
ing acquisition)

Select the frequency range (133
mHz to 8 MHz). (



p.211)

FFT Window Function Type
(



p.214)

Setting method

Use the

CURSOR

keys to move the cursor to

each setting item, and select your choice
with the F keys.

Analysis
Numbe*(



p.220)

Analysis Channel

Analysis
Mode

*Coupled with the

[Analy-

sis]

list at the

[Status]

sheet of the Status screen.

Display types of X-axis (horizontal
axis) and Y-axis (vertical axis)

Setting details

To open the screen: Press the

DISP

key

→

Waveform screen

Waveform Color

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands