Hioki 8847 Instruction Manual Download

Page: 105 / 372

6.5 Making Printer Settings

Chapt

er 6

Pri

ing

Make settings on the

[Printer]

sheet of the System screen.

6.5

Making Printer Settings

Printer settings

To open the screen: Press the

SYSTEM

key

→

[Printer]

sheet

Select the print quality.

Move the cursor to the

[Print Speed]

item.

Select

Select the printer density.

Move the cursor to the

[Printer Density]

item.

Select

Select the print size.

Move the cursor to the

[Print Size]

item.

Select

Select the grid type.

Move the cursor to the

[Grid]

item.

Select

Select the channel marker type.

Move the cursor to the

[Ch Mark]

item.

Select

Fast/Coarse (default setting), Normal , Slow/Fine

Light, Midlight Standard (default setting), Middark,

Dark

Small

Print on lower half of recording paper.

Normal

(default setting)

Off, Standard (default setting), Fine, Std Dark,

Fine Dark

Channel number.

Comment

<Print Example>

Voltage

Off

Do not print the channel number or com-

ments on the recording paper.

Ch No.

Print the channel number on the recording

paper. (default setting)

Comment Print the comments entered in the Channel

Settings screen over the waveform on the
recording paper.

A comment setting must have been made.

See: "8.1 Adding Comments" (



p.118)

4
5

1
2

Grid Type

Grids displayed on the screen are not reflected in the printout.

Print Quality

While

[USB Set]

is set to

[Mass Storage]

, printing speed is always Slow/Fine.

Summary of Contents for 8847





















































































































































































































































































































































































Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands

Hioki 8847, Instruction Manual

Search results

Summary of Contents for 8847

Reviews:

Related manuals for 8847

Brands by name

Popular brands