567
Appendix
An error occurred, so could not upgrade.
The number of times you can access exceeds the maximum, so could not be
displayed.
Cannot write the miniSD memory card because it is write-protected. Use external
devices to unlock the write-protected and try again.
The voice dial entry contains the characters that cannot be stored, so cannot be
stored.
An error occurred, so cannot use the scan function. Update the pattern data and try
again.
An error occurred, so upgrading was suspended.
The URL of the site was too long to operate.
The number of characters for the URL of site exceeds 256, so cannot paste.
The number of characters for the URL of site exceeds 256, so cannot register.
The miniSD memory card in excess of 256Mbytes cannot be used. Use less than
256Mbytes of the miniSD memory card.
The miniSD memory card is in use, so you cannot operate. Try again after you
finish operating the miniSD memory card.
The miniSD memory card is in use, so you cannot set. Try again after you finish
operating the miniSD memory card.
You have not subscribed to Voice Mail Service, so cannot use it. Subscribe to the
Service and try again.
You have not subscribed to Voice Mail Service or Call Forwarding Service, so
cannot use it. Subscribe to the Service and try again.
Currently, “My document” is placed inactive. Wait a while and then try again.
The entered PIN1 code is wrong. Enter the correct one.
The entered PIN2 code is wrong. Enter the correct one.
The entered Password is wrong. Enter the correct one.
The entered PIN1 code is wrong. Enter the correct one.
The entered PIN2 code is wrong. Enter the correct one.
The entered PUK (PIN unblock code) is wrong. Enter the correct one.
The entered Terminal Security Code is wrong. Enter the correct one.
Cannot dial during 64K data transmission. End the 64K data transmission and try
again.
Cannot operate during 64K data transmission. End the 64K data transmission and
try again.
Could not operate during data transmission. End the data transmission and try
again.
Cannot start during 64K data transmission. End the 64K data transmission and try
again.
Cannot start during 64K data transmission. End the 64K data transmission and try
again.
Message
Description
Reference
Unable to upgrade
Unable to view file
Access to URL is limited (491)
Unable to write
Unavailable characters exist
Update pattern definitions
Upgrade interrupted
URL is too long
URL is too long to add
URL is too long to register
Use 256Mbytes or less miniSD
Using miniSD
Cannot operate
Voice mail denied
Voice mail or call forwarding denied
Wait for a while to retry
Wrong new PIN1 code
Enter again
Wrong new PIN2 code
Enter again
Wrong password
Wrong PIN1 code
Wrong PIN2 code
Wrong PUK code
Wrong security code
Wrong security code
Quit
64K connected
Cannot connect
64K connected
Cannot operate
64K connected
Cannot start
—
—
—
—
P.574
—
—
—
—
—
—
—
Back page
Back page
—
P.146
P.146
—
P.146
P.146
P.149
P.146
P.484, 498
P.484, 498
P.484, 498
P.484, 498
P.484, 498
●
“(numerals)” in error messages are the code sent from the i-mode Center for discriminating the error.