87
Making/Receiving
Video-phone
Calls
If a video-phone call cannot be connected, it will be automatically redialed as a voice call.
Video-phone Voice call auto switch
ON··············Switches automatically to a voice call when a video-phone call is not connected.
OFF············Displays the message that you have failed to connect the video-phone call, and returns to the Stand-by display.
1
<Voice Call Auto Switch>
Setting at purchase
OFF
Redialing as a Voice Call when a Video-phone Call cannot be Connected
Select a Chara-den image
3
●
The charges for calls once switched to voice calls are billed at the rates for the voice calls, not the digital transmission.
●
Once the dialed video-phone is connected, the dialing operation for a voice call cannot be done.
●
“Voice call auto switch” cannot be done when the dialed video-phone is a non-existent number, busy, out of the service area, off, set
to be rejected because of no ID, or in Drive Mode.
●
When “Voice call auto switch” has been operated, only the last call is stored in the Dialled Call Record.
Information
Set by Call
You can set the image to be sent to the other party for making a video-phone call.
(
) Select image
Me································Sends the image through your camera to the other party. The setting is completed.
Chara-den····················Sends a Chara-den image to the other party.
Terminate (Release) ····Cancels the setting by every call. The setting is completed.
●
During PIM Lock, you cannot select “Chara-den”.
2
Enter a phone number,
or bring up the detailed display of a Phonebook entry, redial item, dialed call record,
or received call record.
1
●
The priority order for images to be sent to the other party is; “Setting by call”
→
“Camera image sending”.
●
The setting applies just for the one call (dial-out). The settings for “Camera image sending” and “Select image” do not change.
Further, the setting is not stored in Redial/Dialled Call Record.
●
You cannot select “Chara-den” while you are receiving i-mode mail attached with the JPEG image in excess of 10,000 bytes.
●
The setting will be canceled if you make a voice call after setting “Select image”.
Information
<Change setting>
●
You cannot operate while selecting “Pre-installed”.
●
See page 355 for settable still images.
Information